Aqara Power Plug H2 UK (RGB)

Description

Control, monitor and automate compatible Type G appliances

---

A smart plug for everyday appliances

---

Choose Zigbee or Matter over Thread

The H2 supports both Zigbee and Thread, but you choose one operating mode when adding it. Read our guide to Zigbee, Thread and Matter in a smart home if you are deciding how it should connect.

Because the H2 is continuously mains powered, it can also relay supported Zigbee or Thread mesh traffic and help extend the network around the home.

---

See how much power an appliance is using

---

Schedules, timers and whole-home scenes

---

Protection and practical limits

Built-in overload and overheat protection can disconnect the output when an unsafe condition is detected. In Zigbee mode with a compatible Aqara hub, you can also configure a maximum-power limit. These safeguards support safe use but do not replace the appliance manufacturer’s instructions or the H2’s rated limits.

• Connect one compatible appliance directly to the H2.
• Do not connect another multi-way adaptor, extension strip or second smart plug to its outlet.
• Keep the plug indoors and away from water, condensation and excessive heat.
• Stay within the 13A / 3250W maximum rating and any lower limit specified by the appliance.

---

Frequently asked questions

Does the Aqara Power Plug H2 need an Aqara hub?

Not necessarily. Matter over Thread mode connects through a compatible Matter Controller and Thread Border Router from your chosen ecosystem. Zigbee mode requires a compatible Aqara hub and provides the deeper Aqara Home feature set.

Can it monitor electricity use?

Yes. The H2 reports current power consumption and energy use over time. Available charts, history and automation options depend on the protocol and smart-home platform you use.

Can it control any plug-in appliance?

Use only compatible indoor appliances within the 13A / 3250W rating. The appliance must also be suitable for power switching: many simple lamps and fans resume when power returns, while equipment with electronic standby controls may remain off.

Can I switch between Zigbee and Thread later?

Yes, but the plug must be reset and added again in the new mode. Zigbee and Thread do not operate simultaneously.

Which Power Plug H2 UK model is this?

This listing is exclusively for the white SP-P07D RGB model. Its indicator can use colour to show outlet status or power information; there is no model choice at checkout.

---

Aqara Power Plug H2 UK

Power everyday appliances with better control and useful energy data.

Turn compatible plug-in appliances into part of your smart home—with remote control, schedules, energy monitoring and automations.

• Zigbee
• Matter over Thread
• 13A / 3250W
• Energy monitoring

Flexible connectivity

One smart plug, two ways to connect

Choose the mode that suits the smart-home system you are building. The plug uses either Zigbee or Thread at one time, and can be reset if you later decide to change modes.

01

Matter over Thread

Connect directly to a compatible Matter ecosystem. You will need a Matter Controller and Thread Border Router for that platform.

02

Zigbee with Aqara Home

Use a compatible Aqara hub for Aqara Home functions such as power-based triggers, deeper indicator settings and reliable local automations.

03

Helps extend the mesh

Because the H2 remains mains powered, it can relay supported Zigbee or Thread traffic and help improve coverage around the home.

Energy monitoring

Power information you can actually use

See what an appliance is drawing now, review daily and monthly use, then turn that information into schedules, notifications or automations.

Live and historical use

Check real-time power together with daily and monthly energy charts. In supported Aqara setups, a rise or fall in power can also trigger an automation.

Timers and charging protection

Set an appliance to switch off after a chosen time. Charging protection can cut the output after power draw remains below 3W for 30 minutes.

Low idle consumption

The H2 itself uses no more than 0.4W while idle, helping keep the smart control layer efficient too.

Practical safeguards

Safety features that respond automatically

The built-in protections add useful safeguards around a compatible appliance. They do not replace the appliance instructions, correct wiring or the plug’s electrical limits.

13A / 3250W maximum load

Suitable for many everyday indoor appliances when used within both the H2 rating and the appliance manufacturer’s instructions.

Child lock

Disable normal operation of the physical button while retaining control through the app, voice control and automations.

Overheat and overload protection

The plug can disconnect its output when it detects an overload or an internal temperature of 80°C or above.

Set your own power limit

In Zigbee mode with a compatible Aqara hub, set a lower maximum-power threshold for the connected appliance.

Configurable indicator

Keep the status light useful—or turn it off

In Zigbee mode with a compatible Aqara hub, the RGB indicator can follow the outlet state, show the opposite state, remain off or provide colour-based feedback such as a visual indication of power use.

Aqara automations

Build routines around what appliances are doing

The H2 can respond to time, presence and other Aqara devices. Its power readings can also tell an automation when an appliance starts or finishes a job.

Morning routine

Warm up a compatible coffee machine

At wake-up time, presence in the living area can turn on a coffee machine for a set period—provided the appliance safely resumes operation when power is restored.

Useful notification

Know when the laundry is done

When the washing machine’s power draw drops below a chosen level for several minutes, send a completion notification to your phone.